littlemart
   
Posts: 461

I love YaBB 1 Gold!
|
 |
Topping - Tripath T-Amp/ Portable Amp / DAC
« on: December 28th, 2016, 9:38pm »
|
|
Topping
Amplifiers 1) TP60 - Hi power amplifier series, providing 2*80W
 - Using Tripath TA2022 - 80W*2 output power - Supply 2 way RCA input - MCU controlled protection Selling a $299
2 ) TP22 - Using Tripath TK2050 - 30W*2 output power - Supply 2 way RCA input Selling at $140
3 ) TP31 - Using Tripath TA2024 - 15W*2 output power - 24bit,192kHz DAC included - Coaxial/RCA input - Built-in 140mW*2 Headphone-AMP - Manual selection for headphone Selling at $145
4 ) TP30 Mark2 - Using Tripath TA2024 - 15W*2 output power - 16bit,48kHz Auto ON/OFF USB DAC included - USB input / RCA Input - support Android Mobile Device 4.1 or above with OTG connection - Built-in 140mW*2 Headphone-AMP. Selling at $145
5 ) Topping TP32EX
 A multi-function amplifier with excellent sound, meeting the need of users who need a integrated amplifier. -Using Tripath TK2050, supporting 50W*2 output power. -Built-in 24bit 192k coaxial DAC -24bit 96k / 16bit 192k USB DAC -Built-in Headphone-AMP -USB support auto On/Off. -Come with a remote control Selling at $230
6) Topping NX1A (new model)
 The Topping NX1A (NX1 upgraded version) has been designed for MP3/MP4/mobile phone/computer that can not get best effect of high impedance from the headset due to the low power. NX1A keep same circuit and component of NX1 to keep a same sound. But after modifying other part to save power, NX1A’s playback time up to 150h, that’s 50% improvement of NX1. It takes less than 3 hour to fully charge the battery. Even 5 minutes charge could provide 10 hour playback. Its USB charging port has been enhance to be able to use standard Micro Usb cable for charging - 100mW*2 output power. - Built-in rechargeable lithium battery, approx 150 hours playback time. - Selectable gain (H & L) - Use high quality components to get better performance. WIMA capacitance, EPCOS capacitance and ALPS potentiometer - Small size Selling at $75
7 ) Topping NX3
 Following the very popular NX1 portable amplifier, Topping launch another value for money portable amplifier NX3. Internal amplifying chip using TI TPA6120A2.
- TI TPA6120A2 amplifier chip - OP Amp - OPA2134 - Mega bass - low Battery LED reminder - USB intelligent Charging - 2400mAh large-capacity battery - 25hr playback time - Come in Black/Silver Color Selling at $110
8 )Topping NX5 (New Model)
 AD8610+BUF634 high performance combination Every sound channel of Topping NX5 use low noise HIFI Operational amplifier AD8610 of American ADI as Signal amplifier. Every channel use one piece of BUF634 as output buffer of output circuit. - Mega bass - low Battery LED alert - USB intelligent Charging - 2400mAh large-capacity battery - 30hr playback time Come in Black/Silver Color
Selling at $180
DAC
1 ) D3 - Highest performance multi-function DAC in Topping DAC Range with built-in Headphone amplifier - Using CS4398, CS8416 - USB, OPT, BNC, COA, AUX input - Headphone-AMP included - Support 32kHz-192kHz - Support 16bit-24bit - Currently available in Black / Silver Selling at $200 [color=red](Price drop)[/color]
2 ) C1 USB Interfaces not only provide just the various interface for connection to DAC, it is also a high Performance device to reduce the jitter to the minimum. It is often encourage to go through them before to a DAC. Not even a Asyn DAC can reduce much jitter as much as an USB Interface does - Using TE7022L - LED display frequency - USB input - SPDIF RCA+Optical output - 32kHz-96kHz, 16bit and 24bit - Very small size Selling at $90
|
|
Logged |
One Stop Audio E-Storz: Amplifier, Pre-Amp, DAC, Bluetooth/Wifi Streamer, Conditioner, Cable, Accessories etc
HP: 97223884 Ordering: Mail/AMK Pickup Evening Website: http://littlemart.wordpress.
|
|
|