Seng123
Posts: 298
I love YaBB 1 Gold!
|
 |
V6i Hyper Class A Integrated Amplifier 150Walts
« on: July 31st, 2018, 10:47pm »
|
|
http://www.dussun.com/english/v6.html
https://positive-feedback.com/Issue24/dussun.htm
The korsun / dussun v6i is a monster of a power amp from china . It really is a poor man's krell or Mark Levinson that is built like a tank with dual mono construction in 1 stunning but large aluminium chassis. It is kind of a class A build in that the first few watts are class A were then it slides into class AB mode as it is driven harder; with output powers of 2x300 W into 4Ω and 2x150 W into 8Ω.
Overview of V6i integrated amplifier
The V6i is an extension of Dussun’s high-end product line. The objective of the development of the V6i, built on mature Dussun products, is:
● improve sound quality completely;
● enhance the power output stage driving; and,
● control capacity upon speakers.
Special design features of the V6i include: the output stage peak current was designed up to 60 A, and the transformer capacity per channel was designed up to 600 VA. In order to increase sound quality, and to modify the V6i harmonic spectrum for much lower odd order harmonic wave energy, V6i employed the adaptive-bias circuit with an ideal specification.
Its multi-stage power supply and system loop not only increased the V6i signal-to-noise-ratio to a higher level, but also suppressed the AC power source hum which many times contaminates the purity of the music under a large power output, as well delivered extreme high purity and silence of aural feeling while playing strong dynamic music segments.
The inner configuration of the V6i followed Dussun’s successful full-symmetrical style. This effective configuration is essential to make the V6i achieve a large power output and low noise objective.
There is an independent dedicated protection circuit with complete functionality for per channel, which can auto-diagnose probable overload and malfunction, then auto-protect accordingly.
The preamplifier stage and power amplifier stage are open to the user, allowing the user to use V6i’s either preamplifier stage or power amplifier stage. For general use, V6i’s preamplifier stage and power amplifier stage were linked by a pair of link pins. If the link pins are removed, it is easy for the user to use either V6i’s preamplifier stage or power amplifier stage respectively. The volume control is built in the preamplifier stage, so the preamplifier output signal level is controlled by the volume control knob.
As a terminal open for the user, the preamplifier stage is driven by a high performance low inner resistance buffer, which can drive many kinds of power amplifiers with more than 600 Ohm input impedance. The volume is not controlled by the volume control knob if the V6i’s power amplifier stage is operated solely.
The IR (infrared) Remote Control can be used to control the V6i’s volume and input signal selection.
True Dual Mono configuration
Output power: 150W@8Ω, Class A
300W@4Ω, Class A
Infrared remote control
The preamp and power amp stages may be used separately
Dual Mono ultra-low-noise toroidal transformer
Over 32,000 MFD of filter capacitance per channel
Minimal internal wiring
Ultra-short signal path
Non-magnetic, non-resonant aluminum cover
Non-invasive protection system
Microprocessor-controlled passive volume potentiometer
High quality. double-sided printed circuit boards
Van den Hul CS-122 HYBRID loudspeaker cable for power transfer
Exclusive custom Dussun gold-plated high-current audio connector for amplifier and loudspeakers
Selling at $1200 item with out remote
interested pls sms me at 96221090
|
Author
Logged