epiphany
Posts: 106
I love YaBB 1 Gold!
|
 |
FS : Cary DAC 200ts (price reduced for CNY!)
« on: January 25th, 2017, 3:42pm »
|
|
Mint Condition with box, manual, remote.
Local set, six months old.
I am bundling the sale of this Fully Balanced Tubed DAC Preamp with a bunch of very rare and expensive NOS tubes (matched pairs, low noise platinium grade) for the lucky buyer to have endless pleasure in tube-rolling.
Stock 12AU7 x 2 (untouched)
Telefunken 12AU7 x 2
Amperex 12AU7 x 2
Mullard 12AU7 x 2
& some other interesting ones.
If you are a NOS tube connoisseur, you will know what wonders each of these pair can do for your music diet...
The Cary DAC has an easy access panel to the tubes to allow quick swapping without having to remove the entire top cover.
http://www.caryaudio.com/products/dac-200ts-digital-to-analog-co
nverter/
The DAC-200ts digital to analog converter is the pinnacle in digital AND analog circuit topology.
Fully Balanced DAC topology using 4 x 2 channel AK4490EQ
Packed with features like TruBit™ upsampling, the DAC-200ts utilizes a 128 bit DSP engine that expands native bit depths to 32 bits and upsamples incoming rates to 1 of 7 selectable sample rates, up to 768 kHz! Whether a signal is upsampled or left native, the signal is clocked several times with our OSO™ reclocking, then sent to 4 independent DACs for 8 channels of processing. Why do we go to such lengths when our competitors use one or maybe two DACs? Because using multiple parallel DACs ensures that the process of converting a true balanced or single ended digital signal will retain all the musicality stored within while transitioning it to a pure analog signal that sounds like analog! Even more important than the digital topology is the analog circuit. Once we’ve ensured the best possible, most pure, conversion of the digital information to an analog signal it is introduced to our analog circuit. Drawing on our years of experience in designing some of the world’s best analog circuits, the analog section of the DAC-200ts is nothing short of amazing. Our Dual Independent Output (DiO™) analog topology utilizes a separate solid state output stage and a separate vacuum tube output stage. Not to be confused with a hybrid design where a circuit always has the same sound characteristic, the separate independent analog output stages allow you to tailor the sound of the DAC-200ts to your source material with the simple touch of one button. As we know, source material varies greatly in terms of its recording quality. Having the ability to enhance the sound characteristics of the DAC-200ts to match your source material means maximum flexibility for maximum sonic benefit. Not only is the DAC-200ts a reference level digital source unit, it can also be used as a digital preamplifier using its 3.0 volt variable volume output. What’s more, a clock input allows for the use of an external master clock, or using the clock output allows the DAC-200ts to function as a master clock for other digital sources capable of a master clock input.
The DAC-200ts supports super high resolution Asynchronous USB computer audio. That means PCM up to 32 bit/ 384 kHz as well as native DSD 64 and 128 audio. Additionally, the DAC-200ts includes; CSR aptX® lossless Bluetooth, SPDIF coaxial and Toslink inputs, AES/EBU input and both fully balanced XLR and RCA outputs. Large VFD display, full function remote control, and Ethernet and Wi-Fi for control systems are also included.
Many rave reviews:
http://www.10audio.com/cary-200ts.htm
Selling at $3200
SMS : 9662 - two six two eight
|
Author
Logged