Sky_Audio
Posts: 940
I love YaBB 1 Gold!
|
|
Our best selling power distributor
« on: November 3rd, 2021, 10:29am »
|
|
Introducing the High cost performance power strip from Kojo Technology, Japan
Simple & Well thought-out design
Price- S$280
Price- S$380
Price- S$300
design & sound quality tendency
Crystal3.1 / 6.1 (Crystal series) was designed with the concept of clearness and delicacy, as the name suggests.
"Transparency x dynamic feeling" The Force bar series has received a lot of praise for its performance. Unique ideas and innovative ideas and cuts have brought sound quality effects beyond imagination, but this time Crystal 3.1 / 6.1 goes far beyond that.
The breadth and balance of the audible band, spatial expression and transparency have increased, and I want to continue listening comfortably. It is a model that makes me think like that.
It's not enough to just listen to it cleanly, it's a low range that sinks deeply to the low end and extends. Mid-low range that is full of dynamism and shakes your heart. From the mid-high range that runs through exhilaratingly, the high range that gently and smoothly grows and disappears will grab the heart of the heart of the listener.
Crystal 3.1 / 6.1 with a simple design has earned the title of "CREATIVE POWER ACCESSORIE" as a creative power accessory that is unique to KOJO TECHNOLOGY.
Adopts the well-established "MIS (Mechanical Isolation System) " structure”
Like the previous Force bar series, the body consists of 3 parts: TOP cover, BOTTOM chassis, and sub chassis.
By mounting all parts from the inlet to the outlet on the sub-chassis and suspending them from the outer case (TOP cover, BOTTOM chassis), unnecessary vibration from the outside that affects the power tap is attenuated. Conventionally, titanium spacers were used for the joint between the TOP cover and sub-chassis, but Crystal 3.1 and 6.1 have a damping alloy that can attenuate from infrasound to the ultrasonic range: M2052.* 1Uses a spacer (non-magnetic material). The attenuation of unnecessary vibration is made higher.
Body material with increased rigidity and robustness
For the body consisting of three parts, the TOP cover has been changed from steel to aluminum, and the BOTTOM chassis and sub chassis have been changed from aluminum to steel for the Force bar series.
As a result, the weight of both Crystal3.1 / 6.1 has been increased by about 20% (Crystal3.1: 550g⇒665g) and (Crystal6.1: 907g⇒1080g).
In addition, the BOTTOM chassis, which is directly affected by vibration from the floor (installation surface), has not only the above-mentioned material changes, but also has been reinforced from 1.6 mm to 2.0 mm in thickness, and has excellent shock and vibration absorption. The original molded honeyite (made of inner and outer rubber) has been changed to a TAOC vibration absorbing sheet.
These further improve the vibration suppression effect of MIS, increase the rigidity of the entire body, and greatly contribute to a sense of stability and high sound quality during setting.
Internal wiring material
The wiring material for the power supply line has been changed from 4N oxygen-free copper to tin-plated 1.6mm while inheriting the single-wire material that actively utilizes the skin effect. It is straight-wired so that it can be transmitted from input to output without loss.
Even when soldering each part, we carefully examine, select and use those containing special ingredients, and our company's special meisters work with skillful techniques.
Unique connection function
Crystal3.1 has its inlet unified to the international standard: IEC60320 C14, and can be connected and expanded with other Crystal series (Crystal 3P / C1P, etc.) equipped with a connecting inlet plug (IEC60320 C13). Although both body size and weight have been changed, it is possible to connect with the Force bar series (Force bar3P / S1P, etc.) * 1.
In addition, when connecting to the Crystal series equipped with a connecting inlet plug, a dedicated connecting plate * 2 is prepared to improve the coupling, and it can firmly hold and fix the rattling and rattling of the fitting part.
The Crystal series will continue to introduce a wide variety of power strips by function, making it possible to build a highly expandable power strip system that matches individual audio systems
Please feel free to make an appointment with us for a demo. You can bring your own power distributor to compare also.
Thanks & Best Regards
Steve
Sky Audio 28 Sin Ming Lane #05-137 Midview City Singapore 573972
|