mcheong
  
Posts: 116

I love YaBB 1 Gold!
|
 |
FS: Hot-rodded APCO A75 (Lenco L75) Turntable
« on: December 23rd, 2021, 5:29pm »
|
|
This APCO A75 De Luxe turntable is an OEM’d Lenco L75 with a more up-market look. Unit is in excellent condition with many refinements. Fully serviced. Plug & play.
The A75 is mounted on a heavy European made multi-layer plywood plinth that supports a second arm (Rega-mount). An Audiomods Classic II micrometer tone arm is mounted. The micrometer facilitates VTA adjustment on the fly to find the sweet spot. Arm wiring is continuous silver wire loom and interconnect. Other work done on this turntable:
- Tonearm v-blocks replaced with the Desmo units
- Tonearm counterweight stub straightened and stiffened
- New Spindle/Bearing from Micro Sound Co.
- All drive-related parts and mechanisms cleaned
- New Idler wheel fitted & supplied with 3 different tyres for you to try
- Idler wheel arm damped with Teflon Tape
- Jean Nantais thread and weight idler tension system
- Motor completely disassembled, cleaned, and centred
- Both ends of motor spindle cleaned, packed with fresh grease, and bench adjusted for minimum noise
- RCA phono cable with proper signal ground wire installed
- Power cord replaced with 3-core cable with earth drain wire connected to motor for safety



Shure M75 Cartridge on Lenco Arm. (NO Cartridge on AudioMods Arm)

Jean Nantais Idler Tension System

Audiomods Classic II Arm with micrometer VTA adjustment.

Straightened End Stub of Lenco Tone Arm, with Desmo V-blocks fitted.

Micro Sound Co Spindle/Bearing vs Original Lenco Spindle/Bearing

Multi-layer Heavy Plinth

New Machined Idler Wheel (supplied with 3 types of tyre – Fat Silicon, Skinny Silicon, Fat Rubber)

$2500/-.
Do note that the only cartridge supplied is the Shure M75MB mounted on the original Lenco tone arm. The cartridge mounted on the Audiomods tone arm IS NOT part of the deal. *** NO CARTRIDE ON AUDIOMODS ARM***
WhatsApp 96895432 to deal or question.
|